The Adjust-A-Wings Hellion VS3 series of LED grow lights brings the ultimate in user defined control to your fingertips! The Hellion VS3 series of LEDs offer you, as a grower, the ability to vary the spectrum of the Hellion VS3 LEDs to suit the stage of growth for your plants. With 3-channel spectral mixing, using the Veg, Bloom and UV controls, you can tailor the amount of each light spectrum to suit your plants.
This level of fine control offers you the opportunity to learn how your plants grow and, as a result, enjoy the results of your findings with enhanced plant control and improved results. Giving your plants what they want at different stages, can result in:
The Hellion VS3 LED grow lights feature the very latest LED and multi-driver technologies. The Hellion VS3 range represents a whole new level of horticultural light quality, system efficiency, user-defined spectral adjustability with improved canopy penetration power.
With 4x models available to suit the size of your application, what are you waiting for? If you still need convincing, read below for more key benefits and technical specifications.
With models in the Hellion VS3 range from 250W to 1000W you're covered from small propagation tents to bigger growing areas:
[L x W x H]
|250W||620||540 x 540 x 106||0.75 x 0.75|
|510W||1,325||840 x 840 x 106||1 x 1
1.2 x 1.2
|700W||1,850||1120 x 1120 x 106||1.2 x 1.2
1.5 x 1.5
|1000W||2,700||1.5 x 1.5
1.8 x 1.8
The Adjust-A-Wings Hellion VS3 LED grow lights are powerful and need to be hung at the correct height to avoid damaging your plants. The units work best when they're hung 45-60cm (18-24") above the plant canopy.
Garden tip: If height is an issue, dim the units to 75% and hang them 30-45 cm (12-18") above the plant canopy.
The Hellion VS3 LEDS are supplied with the appropriate power connections for the country of sale. Before you power the unit on, ensure the power lead and LED bars are fully seated into their reciprocating socket(s).
|Input Voltage*||100 - 265VAC 50/60HZ|
|Environmental Protection Rating**||Drivers = IP67|
|LED Bars = IP65|
|Driver Housing = IP20|
|Cooling||Passive cooling bars shouldn't exceed 50ºC
*Input current = W / V.
**Suitable for operation in damp locations, avoid direct contact with water.
NOTE: For correct and safe operation, ensure that the ambient temperature is maintained below 40ºC.
The following points highlight the key benefits of the Adjust-A-Wings Hellion VS3 LED Grow Lights:
The range of Hellion VS3 LED light fixtures produce a rich baseline full spectrum by incorporating 3K and 5K white diodes with 660nm reds. Standard “full spectrum” LEDs often use just one white diode type mixed with 660nm reds and stop there.
The Adjust-A-Wings R&D team found improved results when they combined 3K + 5K + 660nm with far-red and UV-A diodes. This combination delivers a superior quality light, that works to drive increased levels of photosynthesis and promoting higher quality crops.
Hellion VS3 range of LEDs offers you a revolutionary, new level of photomorphogenic*** control. With separate dimming for veg, bloom and UV, it’s easy to dial in the perfect spectrum for compact and vigorous vegetative growth, reducing stretch during transition, and piling on weight plus colour and flavour in bloom.
***Photomorphogenesis is light-related development where plant growth patterns respond to the light spectrum. It's separate to photosynthesis, where light is used as a source of energy.
Most LED fixtures use a single driver to run the entire fixture, which inevitably compromises fixture efficiency. The Hellion VS3 LEDs combine THREE separate drivers, which are dedicated to veg, bloom and UV diodes. Providing dedicated drives allows you to control the levels of each light spectrum allowing new levels of system efficiency.
Adjust-A-Wings are known for their awesome canopy penetration! To help in this department, the VS3 range utilize own micro-reflectors that sits beneath each light bar. The micro-reflectors channel photons towards the canopy, helping to squeeze every ounce of efficiency out of the fixture. Micro-reflectors offer greater precision, focus and radiant intensity. They also remove the need for efficiency-sapping lenses.
All Hellion VS3 LEDs are equipped with three independent channels (Veg, Bloom and UV). The new-to-market channel mixers are totally user-definable and offer you total control over the spectral control and diversity you give to your plants:
If you want to control your Hellion VS3 from outside your grow room, then these controllers have you covered with the The Hellion LED Master VS III Controller and the Hellion LED Easy VS III Controller:
The Hellion LED Master VS3 Controller brings you a digital LED light control solution, offering an intuitive, touchscreen, multi-channel LED light controller. It brings you complete control over your indoor garden and Hellion VS3 LED light fixture. It features an easy-to-use, touchscreen interface with total flexibility. It also offers scalability for growers of all sizes.
The Hellion LED Easy VS3 Controller is an analogue multi-channel LED controller that takes the headwork out of optimising your garden. Simply power up, pick your photoperiod, dial in your perfect spectrum, and you’re good to grow!
The ability to tailor your LED light fixtures spectral output to suit the stage of your plant's development, means that you can use a single unit from start to finish. The fine spectral control you get with the Hellion VS3 LEDs, means you can achieve a lot more than with a conventional LED grow light. They give you total, user-defined control, so you can get more out of your plants.
The Hellion VS3's offer you the opportunity to learn and repeat the best lighting conditions for the individual plant types you’re growing. You may notice your plant responds well to a certain setting during veg or bloom, giving you better than expected results, verses what you've seen in the past? The VS3's offer you the ability to tailor the specific spectral requirements for individual plant types/strains. This could well result in you getting more bang for your buck! Couple the ability to tailor the full spectral output with your specialised (and repeatable) environmental and nutritional learnings and you could well see greatly improved results.
The Adjust-A-Wings Hellion VS3 LED Grow Light is for you if you want total control over your plant's development and keep a handle on costs. The ability to dial in the spectral output means you can provide the right light spectrum to influence: internodal spacing, stretch as well as boosting essential oil production in the last couple of weeks of bloom.
The following general settings highlight the R&D findings by Adjust-A-Wings during the development of the Hellion VS3 LED grow light. These settings cover you in a starter-for-ten, no previous knowledge situation. They act a baseline guide to get you started on your first grow:
During propagation, you'll gradually increase the intensity of the vegetative channel as your plants develop. Some UV can work to help strengthen seedlings and cuttings.
Blue-dominant spectrum helps to keep plants squat and bushy, which makes them easier to illuminate efficiently during the bloom phase.
Combining lower bloom with higher UV and high veg can help to reduce unwanted internodal stretching. If some stretch is desirable, try cranking up the bloom by 20%.
Increase the bloom after flowers begin to develop. The extra red and far-red promote branching and help to increase flower size and density.
During the final few weeks, additional UV can help to boost flavours, colours, and essential oils. If the ceiling height permits, try leaving all channels on full and raising the fixture by 5 -10 cm (2 – 4″).
There are no reviews yet
Your shopping basket has no items.