Regular Price: £499.95

Special Price £399.95

Regular Price: £499.95

Special Price £399.95

Need advice? We are here to help. Call us on 0800 085 7995

free delivery on uk mainland orders over 50

DLI 315w CRI-Series CMH/CDM/LEC Fixture

DLI 315w CRI-Series CMH/CDM/LEC Fixture

Quick find: DLI_CRI

In stock

Be the first to review this product

  • Superior light spread, reflection and uniformity
  • No hotspots
  • Available with a Red or Blue Lamp
  • Extra low-profile housing
  • Amazing spectral output
  • Perfect to install between 4 x 1000w DLE Joule fixtures
  • Highest total reflectance at all PAR wavelengths from 400 to 700nm.
  • Compatible with the DLI DLM 4-Zone Controller

Description

This isn’t a space ship; it’s the 315w CRI-Series Grow Light from DLI!

CMH / CDM / LEC Lighting is the latest addition to HID horticultural lighting. The bulbs are super-efficient, with the red model producing 1.9 umol per watt and the blue producing 1.7umol per watt – The highest efficiency SE lamp currently available. CMH lamps produce a spectrum that’s close to the sun’s spectrum at a high altitude. The extra UV produced by the lamp will add quality to your crop.


As a standalone fixture, you should use red lamps throughout flower over a footprint of 1m x 1m per fixture. Due to the rectangular footprint of the reflector, a slightly more uniform spread of light can be gained over a rectangular shape such as 1.2m x 0.8m. Use of the blue bulb during flower will produce tight internodal spacing leading to a higher yielding plant come flower time. The red bulb can be used throughout an entire cycle but better results can be gained using a 2-bulb system, where a blue bulb is fitted into the reflector throughout early development and vegetative growth, swapping to a red bulb 2 weeks after the onset of flower.


Expect better results than your current lighting fixtures as these DLI units use a new design reflector and Philips components


When used as a supplementary fixture, the manufacturers recommend placing a 315w CRI-series between 4 x 1000w Joule series HPS fixtures. In this config, a blue lamp should be used to offset the oranges and yellows produced by the DLI Enhanced HPS lamps. blue is also great as standalone lighting for stock plants, vegetative growth and clone rooms as it gives the plant the best start in life with access to high quality light, leading to healthier growth.


The #FLOWERSONLY Reflector is manufactured to have the highest possible total reflectance at all wavelengths giving excellent PAR rendition. Efficiency and uniformity are the focus in the design of the #FLOWERSONLY Reflector. The unique design and the high uniformity of light results in less hotspots on the canopy and a more even plant growth. The DLI CRI-Series are Plug & Play with the DLM-4 Zone Controller. A RJ12 Connection Kit is included with each fixture.


The DLI reflectors are manufactured to have the highest possible total reflectance at all wavelengths from 400 to 700 nm giving excellent PAR rendition. The integrated hemispherical reflectance is over 95% with an absence of iridescence colours in the louvre.


The DLI reflectors are made from an electrochemically brightened high purity aluminium substrate coil, and start with an anodised base coat which gives a hard support to minimize abrasion damage. The material is then treated under vacuum with specially developed processes to maximise coating adhesion and is vacuum coated with a super pure reflection layer of 99.99% pure aluminium.


These reflection layers are overlaid with a dual layer oxide system tuned for maximum visible reflection enhancement. This serves to increase the overall reflectivity provided by the metallic layers and adds protection against damage.


DLI CRI-Series technical specification:

DIMENSIONS:

430 X 294 X 181mm

16.9 X 11.6 X 7.1 INCH

WEIGHT: 6.5 kg / 14.3 lbs

DIMMING WITH CONTROLLER: ON-OFF (no dimming)

FREQUENCY: 50/60 Hz

TYPICAL CURRENT: 1.4A @ 240V

MAXIMUM CURRENT: 3.2A @ 110V

INRUSH CURRENT: ≤ 40A

POWER FACTOR: ≥ 0.98

INPUT VOLTAGE: 120 ~ 240V

INPUT VOLTAGE RANGE: ± 10%

RATED POWER: 340W


DLI JOULE INFO



How to use the DLI 315w CRI - Series Grow Light

It’s a complete fixture that just needs to be plugged in to get growing


Can be used with a standard contactor or the DLM-4 Zone Controller for the ultimate in control.


DLI recommend using one of these 315w CRI-series fixture for every 4x DLI 1000w Joule series.


The 1000w Joule units will produce an above average yield for a high end horticultural lighting fixture while the addition of the 315w CRI series fixture will increase overall plant structure and quality by reducing stretch at the onset of flower and stimulating the production of flavinoids and terpenes throughout flower.


Use with the appropriate Blue or Red lamp when used as standalone lighting fixture to mimic the colour of the sun at a particular time of year to stimulate the sype of growth you waqnt to achieve.

Specifications

Reviews from feefo

There are no reviews yet

Your shopping basket has no items.

Write Your Own Review

You're reviewing: DLI 315w CRI-Series CMH/CDM/LEC Fixture

*How do you rate this product?

Price
Value
Quality
×