Lumatek Zeus 1000W Xtreme PPFD Co2 LED Grow Light

What is the Lumatek Zeus 1000W Xtreme PPFD Co2 LED Grow Light?

The Lumatek Zeus 1000W Xtreme PPFD Co2 LED provides you with 10x magnetic bars of efficient, low powered LED light with an awesome efficiency of up to 2.9 μmol/J.

Full Cycle LED Grow Light for Co2 Growers

The Zeus 1000W Xtreme PPFD Co2 is an ultra-high performing, full-cycle grow LED solution. It is well suited to commercial and hobby horticulturists that grow to the extremes by using supplementary Co2. The LED covers an array of cultivation applications. Being full-spectrum, means it's the only light you'll need for the full lifecycle of of your plants. It allows you to use the single light from seed through vegetative growth and on to higher light intensities during bloom.

Easy to Assemble - Manoeuvrable and Agile

Lumatek 1000W LEDs are supplied disassembled. The boxes are easy to transport, unlike some others LEDs that need pallet delivery. The boxes are smaller and are easier to get to your growing space, through those awkward hatches. They are straight forward to assemble in a matter of minutes.

No Co2 - No worries

If you grow without Co2, but want the flexibility or ability to move on to Co2 supplementation, this LED is a great option. While you're not growing with Co2:

• Use a larger footprint growing space (1.8 x 1.8-metre)
• Increase the headroom between the LED and canopy
• Use the dimmer to maintain increased lighting levels

When you're ready to grow with supplementary Co2 the Lumatek Xtreme PPFD LED is perfect, it'll give you the results you're looking for.

Match Your Grow Room with Light Requirements

If you're growing with supplementary Co2 the 1000W Xtreme PPFD Co2 units are designed for a 1.5 × 1.5-metre area. Without supplementary Co2, you'll need to step up the growing space to a larger 1.8 x 1.8-metre area.

Garden tip: Using the 1000W Xtreme PPFD Co2 without supplementary Co2? You'll need to provide additional height, as more space is required between the light fixture and canopy. Always dim the lights for younger plants and seedlings.

External Controllers

The Lumatek Zeus 1000W Xtreme PPFD Co2 LEDs are high-powered LED grow lights. Your plants probably won't need them to run at 100% throughout their lifecycle. The units come supplied with a Lumatek 0-10V rotary dimmer with velcro strap. The strap allows you to fix the unit outside the growroom and dim your fixtures as required.

Lumatek Zeus 1000W Xtreme PPFD Co2 LEDs are fully compatible with either the Lumatek Digital Panel Plus 2.0 or with any other Control System that utilises 0-10V output signal. If your Universal Controller has an "RJ" port interface, you can still control Lumatek LEDs. Simply convert the signal using an RJ to 0-10V control adaptor.

High Quality Drivers and Top Bin LEDs

The Lumatek Zeus 1000W Xtreme PPFD design utilises high quality drivers with the latest generation of top bin LEDs from Lumileds and Osram. The LEDs are housed in bars that are cleverly fixed in place using magnets.

Flexible Install Options

For even greater flexibility, you can either mount the LED driver to the unit or use it remotely. If you use the driver remotely, you'll need to use a 5-metre power extension cable, available separately.

Full Spectrum Light

The Zeus 1000W Xtreme LED light is a full-spectrum LED grow lights - this makes them the only source of light you'll need for veg (using the included dimmer) and flowering cycles:

• The Zeus 1000W Xtreme LED offers a PPF of up to 2925 µmol/s and an efficacy of up to 2.9 µmol/J.

Match the Recommended PPFD to the Stage of Growth for your Plant

The following table covers the recommended PPFD (µmol/m2/s) for a fast growing, light sensitive annual plant:

Clear Glue Protection Technology for More Light and Simple Maintenance

Clear Glue protection technology results in 99% of total the photons produced being transmitted without light loss. The high level of protection offered extends the lifetime of diodes by providing corrosion resistance and IP65 waterproof protection. Maintenance is basic - you'll simply clean the bars with a damp cloth.

Single Light Source Throughout the Lifecycle of your Plants

The Xtreme PPFD Co2 LED range are dimmable without losing efficiency. This means it's the only light fixture you'll need throughout the lifecycle of your plants. The use of 10-bars of high efficiency, low powered LEDs reduces the temperature of the LEDs. This works to allow an increased light output with improved light maintenance.

Garden tip: The 100W LED bars are simple to replace or upgrade if new, compatible LED light bars become available in the future.

Suited to Multiple Grow System

The Lumatek Zeus 1000W Xtreme PPFD Co2 LED is designed primarily for using with supplementary Co2 in 1.5 x 1.5-metre growing areas.

These units exhibit a uniform spread of light at a short distance, however it's not recommended using LEDs too close to the canopy unless you're dimming them back to a suitable power level. Depending on the stage of growth, dimming can be decreased as you increase the distance between the fixture the crop canopy.

The LED lights are "full-cycle" LED grow lights. This means they can be used as the single light source throughout the plant's lifecycle. These LEDs highly flexible and suited to:

• Multi-layer cultivation systems
• Single benches in low rooms
• Grow tents

What is the Light Footprint for the Lumatek Zeus 1000W LEDs?

Lumatek Zeus 1000W Xtreme PPFD Co2 LED Footprint

This fixture is perfect for covering a 1.5 × 1.5-metre area with supplementary Co2. You can also use this LED without Co2 in a 1.8 × 1.8-metre area.

1000W Extreme PPFD Co2

Technical Specifications

Lumatek Zeus 1000W Xtreme PPFD Co2

* = to the top of the driver

INPUT CURRENT (A/W) PER DIMMING RANGE - 1000W Xtreme PPFD Co2 LED