SANlight EVO 4 LED Grow Light

What is the SANlight EVO 4 LED Grow Light?

The EVO 4 is SANlight's most flexible grow light.

EVO 4-100

The Evo-4 100 is designed for 1.0m2 growing areas with the addition of supplemental CO₂. We don't recommend using the EVO 4-100 units in the defined floor area without the addition of supplemental CO₂. With 250 W and 696µmol/s per unit, this light fixture will grow awesome plants.

Garden tip: If you're growing without CO₂, you'll want to use the EVO 4-120 and up your grow tent to a 1.2m2 grow tent.

EVO 4-120

The EVO 4 is SANlight's most flexible grow light. The Evo-4 120 suits most 1.2m2 growing areas. The unit maximises the amount of light plants need and is edging towards the limits of growing without a separate CO₂ feed. With 250 W and 696µmol/s per unit, this light fixture will grow awesome plants.

How do I Get the Best Results With a Sanlight EVO-4 LED grow Light?

To get the best results with the SANlight EVO 4 grow lights use them in pairs:

• Use 2x EVO 4-100 LED grow lights with supplemental Co2 in a 1.0 x 1.0m area
• Use 2x EVO 4-120 LED grow lights in a 1.2 x 1.2m area

Due to the solid-state and low-profile design of the new EVO LED growing lights, it’s a lot easier to use two lights. Passive cooling means you can mount them closer to the ceiling. This gives you more room in the middle of the tent to install the ventilation. The EVO-4 LED grow lights give you the best use of the limited height in grow tents.

Simple and highly configurable hanging options mean the EVO-4's are simple to change the angle of fixtures, directing more light where you want it.

Short Distance Uniform Light Via Easy to Clean 3D Secondary Optics

The EVO-4 LED Grow Lights offer the highest possible light uniformity at short distance and illumination intensity. Easy to clean secondary, 3D optics capture and direct more than 95% of the total photons with a uniform light spread. This ensures a constantly even light distribution on your planting area.

What Are The Key Benefits of the SANlight EVO 4 LED Grow Lights

The following key benefits highlight why you need the SANlight EVO 4 LED grow lights powering your indoor growing activities:

• EVO-4 120 is designed for use without additional CO₂ / EVO-4 100 is designed for use with supplemental CO₂
• Both units are 255W and output 696µmol/s
• Impressive illumination intensity when using 2 LED grow lights
• Tilting in 11° allows optimal steering of the beam pattern
• Highest possible homogeneity at short distance and illumination intensity
• No central hotspot, the light is diffused and distributed evenly over the area
• Optional dimming allows the intensity to be adjusted to plant growth stage/growing area
• Highly configurable tilting options allows you to direct light where you want it
• Easy to clean secondary optics capture and direct more than 95% of the total photons with a uniform light spread
• Available solid-state magnetic or bluetooth dimmer for simple adjustment of lighting intensity with fade in (sunrise) functions
• Sanlight Power cords and accessories are available separately - not included in the box

SANlight EVO 4 Technical Specifications

*in the emission wavelength range from 400 - 780 nm

About the New SANlight EVO LED Grow Lights

SANlight's EVO LED Grow Lights are the peak "EVOlution"! The EVO series elevates your growing space to the top-tier of LED growing. SANlight are the leading LED light manufacturers and are known for creating some of the best plant cultivation LEDs in the market. The EVO-Series offers a superb advanced efficiency of more than 3µmol/J at the module level.

The Evo-Series introduces SANlights highly sophisticated development of three dimensional secondary optics. These brand new optics capture more than 95% of the total photons and direct them where you want them: bathing your plants with diffused light.

The EVO series LED lights combines years of in-house expertise and external research to bring you the best, new LED technology!

With the SANlight EVO Series LED grow lights, you benefit from maximum flexibility, the very best system efficiency and sustainability over the LEDs lifetime.

Different Sizes To Cover Any Application

With a variety of different size EVO models available, they have you covered, whether you want to light a small area, a professional indoor garden or a whole greenhouse. With the SANlight EVO series, you can create the perfect lighting solution for any application.

Why Do I Need the SANlight EVO LED Grow Light?

The SANlight EVO LED grow light is the perfect new grow light for any application. Newly available to the UK, this brand new, cutting edge, LED lighting technology is sleek, solid state and brings awesome performance in a super-smart, tight package.

The following points highlight why you NEED this brand new LED grow light powerhouse in your grow room:

• Advanced efficiency
• 3D secondary optics
• Best in class technology
• Ready-to-dim
• High quality IP65 waterproof connectors
• Passive cooling
• Daisy chaining

Advanced Efficiency

The EVO-Series offers you an advanced efficiency of more than 3µmol/J at module level. During development, the EVO-Series team paid particular attention to the light spectrum to ensure, alongside gardening best practices, the fixtures help to produce class-leading yields per area. They carried out many, empirical trials, to fine-tune and optimise the spectrum to benefit photosensitive annuals. The resulting broadband light spectrum extends beyond the conventional PAR range to offer a far red to red ratio. Red light works to positively influence photo-morphogenesis and the final quality and quantity of the harvest.

3D Secondary Optics

The Evo-Series LED introduces SANlights sophisticated development of three-dimensional secondary optics. These brand new asymmetric optics are optimized to the geometric dimensions of the fixture, minimizing losses by capturing more than 95% of the total photons. The optimisation results in a highly dispersed light that bathes your plants in tailored light with improved intensity (PPFD). Combined with the reflective properties of modern grow tents/reflective sheeting, light losses are minimised.

The secondary optics also protect the LEDs from damaging environmental factors/contamination in high-humidity greenhouse/growing situations during the lifecycle of your plant's cultivation. They're also easy to keep clean, which helps to guarantee you a constant light output for many years.

Best In Class Technology

The SANlight EVO-Series LED grow lights use leading-edge, highly efficient OSRAM and Seoul Semiconductor WICOP LEDs.

Seoul Semiconductor WICOP technology provide their patented White LEDs. And the latest OSRAM High Power LEDs are used for red and far-red LEDs.

Ready-to-Dim

Each model in the EVO series is “ready-to-dim”. This means the fixture is compatible with typical, modern greenhouse control systems. Alternatively, you can retrofit the fixtures with a compatible EVO-Series magnetic or Bluetooth dimmer. Compared to mechanical rotary potentiometers, the new SANlight solid-state, magnetic and wireless dimmer solutions last longer. Being solid-state means they're wear-free, sealed units. This makes them perfect for use in humid, greenhouse conditions with better water ingress protection.

High Quality IP65 Waterproof Connectors

The EVO-Series is the result of decades of development experience and learning to create unique, high-quality, IP65 waterproof connectors. All SANlight EVO accessories are IP65 rated, meaning your connections are protected from dust and water jets. Basically, they're designed for harsh, greenhouse environments!

Interconnect and daisy chain cables include:

• 1m/2m extension cables
• 2m Power cables
• H-connectors

The ability to buy off-the-shelf connectors and accessories means you can easily (and safely) configure your system for dimming or daisy-chain to suit your system. The new range of cables includes a range of space-saving angled supply and extension cables.

Daisy Chaining

The EVO-Series introduces a plethora of connectivity solutions for your new LED grow lights! With an eye to the future, and to protect the planet from senseless production of cables that may never be used, SANlight decided not to include any power cables in the box. This allows you the ultimate flexibility to create your own connectivity solution that is a perfect fit for your system with no waste or cables left unused.

What Area Do The SANlight EVO-Series LED Grow Lights Cover?

Tent Size Guide

What Accessories Can I Get For the EVO-Series LED Grow Light?

Accessory Table

The following table highlights the available EVO-Series accessories. It also shows you recommended distances and how many accessories you'll need to cover your application.

SANlight EVO-Series Information Videos

Choosing the Right Light for your Application

SANlight EVO-Series Tilt System

How To Hang Your SANlight EVO-Series Light Fixture

Recommendations for Higher Light Intensities

This video shows you how best to position your SANlight EVO-Series lights in your tent with supplemental CO². Using CO² allows you to grow with more light intensity and higher temperatures. Higher concentrations of atmospheric CO² helps your plants to perform their natural cycles in more extreme conditions, that may otherwise cause stress. Growing with CO² and more intense LED lights can provide you with mind blowing results.

ATTENTION: The setups shown in the below video are designed for the highest lighting intensities. For the best results, CO² supplementation or dimmers are strongly recommended!