from £0.95
from £0.95

Need advice? We are here to help. Call us on 0800 085 7995

Multi-Duct NFT Components & Spares

Multi-Duct NFT Components & Spares

Quick find: multiduct_nft_spares

In stock

Be the first to review this product

  • Spreads your plants out across three channels
  • The MD200 Corex Top Plate can be used to keep light away from the root systems
  • Systems can be suspended using stands

Description

If you're keen to embrace advanced hydroponic technology in your garden, Multi-Duct NFT systems can help. Our components & spares will ensure you've always got the right equipment to deliver results!

 

MD200 Corex Top Plate

Fits perfectly onto the MD200 Top plate and is used to keep light away from the root systems to stop disease and stop light getting onto the nutrient solution to prevent algae that could block the pump and lines

 

MD601 Corex Top Plate

Fits perfectly onto the MD601 Top plate and is used to keep light away from the root systems to stop disease and stop light getting onto the nutrient solution to prevent algae that could block the pump and lines

 

MD801 Corex Top Plate

Fits perfectly onto the MD801 Top plate and is used to keep light away from the root systems to stop disease and stop light getting onto the nutrient solution to prevent algae that could block the pump and lines

 

 

MD200 3 Channel Multi-Duct NFT Tray

The MD200 has 3 channels in which nutrients flow down into which plants in rockwool cubes can sit.

Length = 160cm x Width = 86cm x Height = 24cm

 

MD601 2 Channel Multi-Duct NFT Tray

The MD601 has 2 channels in which plants sit in and the nutrient solution runs through.

Length = 183cm x Width = 70cm x Height = 24cm

 

MD801 2 Channel Multi-Duct NFT Tray

The MD601 has 2 channels in which plants sit in and the nutrient solution runs through.

Length = 249cm, Width = 117cm, Height = 38cm

 

 

MD200 3 Channel Multi-Duct NFT Kit Bag

The MD200 Kit bag contains: A submersible pump, 10ft of 1/2" supply tube, 2 x 1/2" Elbows, 3 x 1/2" single inlet, 2 x 1/2" Male Tee, 1/2" Male elbow, 1/2" Flow Control Valve, 100ft spreader mat, 10 studs, 4 cable ties, a tank cover, a pH test kit and 250ml of pH down. Complete instructions are also supplied with the kit. Everything that was initially supplied with your complete MD200 kit minus the tray, corex top cover and tank.

 

MD601 2 Channel Multi-Duct NFT Kit Bag

The MD601 Kit bag contains everything that was initially supplied with your complete MD601 kit minus the tray, corex top cover and tank. It includes a submersible pump (Newa MJ1000), 100ft spreader mat, 13ft of 16mm supply tube, a 16mm Male Tee, 2 x 16mm elbow, 2 x Blue Y's double inlet, 2 x Double Inlet tees, 2 x 16mm stop ends, 16mm Flow Control Valve, 12 studs, 4 cable ties, a tank cover, a pH test kit and 250ml of pH down. Complete instructions are also supplied with the kit. 

 

MD801 2 Channel Multi-Duct NFT Kit Bag

The MD801 Kit bag contains everything that was initially supplied with your complete MD801 kit minus the tray, corex top cover and tank. It includes a submersible pump (Newa MJ1000), 100ft spreader mat, 15ft of 16mm supply tube, a 16mm Tee, 2 x 16mm elbow, 2 x Blue Y's double inlet, 2 x Double Inlet tees, 2 x 16mm stop ends, 16mm Flow Control Valve, 12 studs, 5 cable ties, a tank cover, a pH test kit and 250ml of pH down. Complete instructions are also supplied with the kit.

 

 

Multi-Duct NFT Tank (90 Litre)

NFT tanks sit under one side of the NFT Tray and catch nutrient solution that has been pumped to the top. This 90 L reservoir is suitable for smaller NFT strays, such as the MD200

 

Multi-Duct NFT Tank (185 Litre)

NFT tanks sit under one side of the NFT Tray and catch nutrient solution that has been pumped to the top. This 90 L reservoir is suitable for larger NFT strays, such as the MD601 and MD801

 

 

Multi-Duct NFT One Prong Stand (Small)

Suitable to suspend smaller NFT systems such as the MD200 so the end being suspended is higher than the tank. Gravity draws the nutrient solution towards the tank and the pump brings it back to the top.

 

Multi-Duct NFT One Prong Stand (Large)

Perfect for suspending medium NFT systems such as the MD601 so the end being suspended is higher than the tank. Gravity draws the nutrient solution towards the tank and the pump brings it back to the top.

 

Multi-Duct NFT Two Prong Stand

Larger NFT systems should be suspended with the two prong stand so the end being suspended is higher than the tank. Gravity draws the nutrient solution towards the tank and the pump brings it back to the top.

 

MD200 Nut Outlet For Threaded Tee

A nut outlet that is able to fit onto a 16mm threaded tee. When pressurised, the nut outlet sends a stream of nutrient solution down a channel to moisten the spreader mat on which the plants sit. you can have 2 Tees in each channel for optimal spread or use a blue Y for each channel which produces 2 streams of water.

Specifications

Cable Length 2.5M

Reviews

Your shopping basket has no items.

Write Your Own Review

You're reviewing: Multi-Duct NFT Components & Spares

*How do you rate this product?

Value
Quality
Price
×