Lumatek ATS LED 200W / 200W 2.5 Pro Grow Light

What are the Lumatek ATS LED Grow Light 200W / 200W 2.5 Pro LED Grow Lights?

The Lumatek ATS LED Grow Light 200W / 200W 2.5 Pro LED grow lights are a compact, efficient and low powered LEDs. These LED grow lights are perfect for using in either 0.8 x 0.8m areas. They're suitable as the sole light source, throughout the life of your plant or as a supplemental light source for larger areas.

Solid State - No Moving Parts

The solid-state design of the Lumatek ATS 200W LEDs uses passive cooling to remove the need for moving parts. This increases their reliability and longevity.

Full Spectrum Light

High-quality, dimmable, Lumatek drivers are paired with LUMLED LED diodes to provide a full spectrum LED grow light - perfect for 0.8m2 areas.

• The 200W Pro version LED unit offers a PPF of up to 508 µmol/s and an efficacy of up to 2.5 µmol/J.
• The 200W LED unit offers a PPF of up to 460 µmol/s and an efficacy of up to 2.3 µmol/J.

LED Array

The LEDs are housed in arrays and offer a blend of white, deep red & far red light. This produces a highly efficient light source that's calibrated to provide high intensity, stable and uniform output for optimal light absorption across the life of your plant. The array of LEDs create a uniform spread of light and allow you to mount them closer to the canopy, enabling good penetration without hotspots and excessive heat.

User Friendly Plug & Play Install

Set up is simple and fast. You'll connect the supplied hangers, power cable and any other applicable items (dimmer etc.) and be good to go in no time.

What's in the Box?

ATS 200W Pro LED

• 1 x ATS 200W Pro LED Fixture with Driver
• 1 x Power Cable 230V
• 1 x 0-10V Light Dimmer + Velcro
• 2 x Metal Cable Hangers
• 1 x Manual

ATS 200W LED

• 1 x ATS 200W LED Fixture (LED Driver and Dimmer Included)
• 1 x Power Cable
• 2 x Metal Cable Hangers
• 1 x Manual

Match the Recommended PPFD to the Stage of Growth for your Plant

The following table covers the recommended PPFD (µmol/m2/s) for a fast growing, light sensitive, annual:

Clear Glue Protection Technology for More Light and Simple Maintenance

Clear Glue protection technology results in 99% of total the photons produced being transmitted without light loss. The high level of protection offered extends the lifetime of diodes by providing corrosion resistance and IP65 waterproof protection. Maintenance is basic - you'll simply clean the bars with a damp cloth.

Single Light Source Throughout the Lifecycle of your Plants

Both models in the ATS 200W range are dimmable without losing efficiency. This means it's the only light fixture you'll need throughout the lifecycle of your plants. The use of six bars of high efficiency, low powered LEDs reduces the temperature of the LEDs. This works to allow an increased light output with improved light maintenance.

Suited to Any Grow System

The Lumatek ATS array creates a uniform spread of light at a short distance to the crop canopy. This is perfect as a single source grow light or as a supplemental light:

• Multi-layer cultivation systems
• Single benches in low rooms
• Grow tents

What is the Footprint for the Lumatek ATS 200 LED Light?

The ATS 200W fixture is perfect for covering a 0.8 x 0.8-metre area.

Both LEDs are perfectly suited to being the only source of light throughout the lifecycle of your plants. It is equally suitable to use as a supplementary light source.

200W Pro

200W

External Controllers

Lumatek LED Fixtures are fully controllable with either the included -10V Light Dimmer + Velcro* (*Pro versions) or with the separately available Lumatek Digital Panel Plus 2.0. Lumatek LEDs are compatible with any other Control System that utilises 0-10V output signal.

RJ Adapter

You can still control Lumatek LEDs if your Universal Controller has an "RJ" port interface. Simply convert the signal using an RJ to 0-10V control adapter.

Technical Specifications - Lumatek ATS 200W LEDs